Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Flow Meter - Style (Flowmeters) 406020/002-440-61 JUMO

Mã sản phẩm: 406020/002-440-61
Sử dụng cho Model:
Hãng SX: Jumo
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
The paddle-wheel flow sensor is suited for the continuous flow speed measurement of neutral or weakly aggressive liquids carrying a low amount of solid matter. Flow rates of 0.3 to 10 m/s can be measured.
The measuring probe provides a frequency pulse signal. Standardized fittings ensure simple installation of the sensor into DN15 to DN400 fittings.

Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683

Thông tin sản phẩm

Features


Simple installation
For pressures up to PN10 and temperatures up to +70 °C
Frequency pulse signal suitable for direct connection to a PLC
Fittings for sensors according to data sheets 406010 and 406020
Large selection of process connections DN 15 to DN 400
Available in plastic or stainless steel
For neutral, aggressive, or contaminated liquids


Applications


Flow control (fresh water, wastewater, irrigation)
Quantity measurement (water meter)
Pump protection, pump control (liquid)
Dosage of chemicals (CIP systems)
Dosage (irrigation)


Specification:

Operating conditions
Measurement medium Water or other neutral or weakly aggressive liquids
Viscosity of the
measurement medium
≤ 300 cStokes
Medium temperature In combination with PVC fitting: 0 to +50°C
In combination with PP fitting: 0 to +80°C
In combination with PE fitting: 0 to +70°C
In combination with stainless stell fitting: -15 to +80°C
Ambient temperature -10 to +60°C operating temperature
-20 to +60°C storage temperature
Tube diameter For diameters DN15 to DN 400.
Only in combination with fittings as per Data Sheet 406090.
System pressure In combination with a PVC or PE fitting:
JUMO_406020_Paddle-Wheel_Flow_Sensor_System_pressure
Minimum inlet and
outlet distances
See illustrations on page 5/5
Relative humidity ≤ 80%, non-condensing
Enclosure protection IP65 (with mating connector connected)
EMC EN 61000-6-2, EN 61000-6-3
Vibration EN 60068-2-6
Impact EN 60068-2-27
Measuring range
Flow
speed
0.3 to 10 m/s
Accuracy With standard K factor: ≤ ± 3% of measured value
After teach-in: ≤ ± 0.5% of measured value
Linearity ≤ ± 0/5% of measurement range end (at 10 m/s)
Repeatability ≤ ± 0.4% of measured value
Materials
Enclosure, union nut PE, PC
Cable plug  PA
Parts in contact with
medium
Sensor: PVDF, ceramic, FKM
Fitting: see data sheet 406090
Electrical data
Power supply voltage DC 12 to 36 V
Power consumption ≤ 50 mA
Output Pulse: 0 - 300 Hz, clock ratio: 50%, ≤ 100 mA, protected against reverse polarity
Connection Device socket EN 175301-803
Recommended
connecting cable
max. 1.5 mm2, max. 50 m long, shielded


Bình luận