| Oscilloscope — vertical |
| Input channels |
4 |
| Bandwidth (–3 dB) |
1 GHz |
| Rise time (calculated) |
350 ps |
| Input type |
SMA |
| Resolution |
8 bits |
| Enhanced resolution |
12 bits |
| Input sensitivity |
20 mV/div |
| Input range (full scale) |
±100 mV |
| Input coupling |
DC |
| Input impedance |
50 Ω ±2% |
| DC accuracy |
±3% of full scale |
| Overvoltage protection |
±2 V (DC + peak AC) |
| Oscilloscope — horizontal |
| Maximum sampling rate (single-shot) |
1 channel in use: 5 GS/s
2 channels in use: 2.5 GS/s (using A+C, A+D, B+C, B+D)
3 or 4 channels in use: 1.25 GS/s |
Maximum sampling rate
(continuous streaming mode) |
9.7 MS/s using PicoScope
>10 MS/s using the supplied SDK (PC-dependent) |
Timebase ranges
Real-time
ETS |
1 ns/div to 5000 s/div
50 ps/div to 200 s/div |
Buffer memory
(shared between active channels) |
1 GS |
| Maximum buffer segments |
10,000 |
| Timebase accuracy |
±5 ppm |
| Dynamic performance (typical) |
Crosstalk
DC to 100 MHz
100 MHz to 1 GHz |
100:1
30:1 |
| Step response |
±3% after 3 ns, typical |
| Noise |
<0.5 mV RMS |
| Triggering (general) |
| Trigger modes |
Free run, single, repeat, auto, rapid, ETS |
| Maximum pre-trigger capture |
Up to 100% of capture size |
| Maximum post-trigger delay |
Up to 4 billion samples |
| Maximum trigger rate |
Up to 10,000 waveforms in a 20 ms burst |
| Rearm time |
<1 µs on fastest timebase |
|