| Type name |
JOB-CT50N |
JOB-CT100N |
JOB-CT500N |
JOB-CT1KN |
| Test Type: |
Compression and tensile amphibious |
| Load capacity (N) |
50.00 |
100.00 |
500.0 |
1000.0 |
| Switching range |
2 range automatic switching (1/1 range and 1/10 range of capacity) |
| Load resolution (N) |
0.01 / 0.001 |
0.1 / 0.01 |
| The accuracy of the load |
Within 1% of the indicated value (factory shipment within 0.5%) |
| standard |
JIS B7738 coil spring - verification of compression and tension spring testing machine primary |
| Behavior |
Measuring the load by specifying the measurement deflection load = deflection of the load to specify the length load = length |
| Unit selection |
mN, N, kN (overseas specifications, the gf kgf lbf can be selected) |
| stroke |
300.00 [mm] in the case of ※ tensile ne if test 200.00 [mm] |
| Length resolution |
0.01 [mm] |
| Length accuracy |
± (0.05 + 0.0001L) [mm] within (any length L is to verify) JIS B7738 fit |
| Crosshead speed |
1 ~ 600 mm / min |
| Cross head control |
The control of the ball screw and servo motor |
| Movement by moving key |
Fast: speed 600 (mm / min) inching 1 (mm)
medium speed: speed of 60 (mm / min) inching 0.1 (mm)
low speed: Speed 6 (mm / min) inching --- |
| Protection stop function |
Stop by the upper and lower limit switch
stop by the upper and lower software limit function
stop by STOP key and the emergency stop button
overload stop |
| Fluorescent display tube |
256 × 64 dot W115 × H29 [mm] |
| interface |
RS232C & I / O Port option (8 inputs, output 8 points) |
| Power supply |
AC100V ~ 240V free power consumption power 100VA or less |
| Standard dimensions (mm) |
W390 × D430 × H770 |
| Standard weight |
About 55 [kg] |