- The OxyTechw² RDO Pro-X Sensor uses the latest optical technology for measuring dissolved oxygen (DO) in demanding wastewater, drinking water, industrial effluent and surface water environments.
- The sensor uses optical sensing techniques that provide a fast response and do not need a flowing sample to operate. There is no need for routine calibration, enabling manual intervention to be kept to an absolute minimum. Periodic validation of the measurement can be done as part of standard quality assurance performed by the operator. The sensor uses an extended life cap that does not have a finite life, though replacement is recommended every two years. When replacement of the cap is required the operation takes only a few minutes with no need to enter complex set up codes and no need to re-calibrate.
- The need for manual cleaning of the sensor is kept to a minimum through use of Partech’s FlexTech mounting system which places the sensor below the surface of the tank, away from the floating fats and grease whilst keeping the sensor face moving to prevent the build up of a biofilm.
- The sensor is part of the WaterWatch² family and works with our 7300w² Monitor. It can also be combined with our TurbiTechw² LA sensor to provide an extremely cost effective package for controlling activated sludge plants.