| Bridge power supply |
10 VDC±0.5VDC within 60 mA (Changeable to 5 VDC or 2.5 VDC) |
| Input range |
±3.1 mV/V |
| Input sensitivity |
0.4 μV/digit (at 10 VDC bridge power supply)
0.2 μV/digit (at bridge power supply of 5 VDC and 2.5 VDC) |
| Monitor output |
Sensor input per 1 mV/V 2 V ±0.1 V ( bridge power supply at 10 VDC), load resistance 2 kΩ min. |
| Output range |
DC±10 V Load resistance5 kΩor more (F.S. setting is available in the function.) |
| Output times |
100 times/s, 500 times/s,1 000 times/s, 2 000 times/s (Synchronous with A/Dsampling rate.) |
| Output resolution |
Same as the displayresolution. |
| Zero adjustment range |
±2.0 mV/V |
| Non-linearity |
Display 0.025 %F.S., Output 0.025 %F.S. |
| Temperature coefficient |
Zero point ±0.5 μV/℃(when calibrated with input sensitivity or higher, or within ±1.0 mV/V of zero for a gauge voltage of 10 VDC)
Sensitivity ±0.01 %F.S./℃(when calibrated at or above the input sensitivity) |
| Input filter |
10 Hz, 100 Hz, 1 kHz |
| A/D sampling speed |
2 000 times/s (Changeable to 100 times/s, 500times/s, 1 000 times/s) |
| Display range |
-11 000 to 11 000 |
| Comparator Display |
Display range ：-99 999 to 99 999
Nos. of display ： 1 point (Selectablefrom S0, S1, S2, S3 or S4)
Display times ：20 times/s (Changeable to 4 times/s, 50 times/s or 100times/s) |
| Comparator function |
Display range ：-99 999 to 99 999
Nos. of display ：1 point (Selectable from S0, S1, S2, S3 or S4)
Display times ：20 times/s (Changeable to 4 times/s, 50 times/s and 100 times/s)
Open collector output function ：'S1, S2, S3, S4 On when reached under/over the conparator set value.
S0 On with each condition of the function setting. |
| Operating temp./humidity range |
Temperature -10 ℃ to 50 ℃, Humidity 85 %RH or less (Non condensing) |
| Power supply voltage |
100 VAC to 240 VAC 50/60 Hz (Permissible variable range 85 VAC to 264 VAC) |
| Power consumption |
Approx.16 VA at maximum (with options, at 230 VAC)
Approx.14 VA at maximum (with options, at 100 VA) |
| Outline dimensions(WxHxD) |
96 mm x 96 mm x 129.5mm (excludes protruding parts) |
| Weight |
Approx. 500 g (without options) |
| Protection code |
IP65 or equivalent (Only for the fron panel when the attached panel mounting gascket is installed. |