Thiết bị đo bụi bằng laser S130
Hãng: Cs-itec (Đức)
| Technical data S 130 |
| Measuring medium |
Compressed air and gases free of corrosive, aggressive, caustic and flammable constituents |
Models: S 130-A
S 130-B
S 130-C
S 130-D
S 131 |
2 channels: 0.3, 0.5 m
4 channels: 0.2, 0.3, 0.5 and 1.0 m
4 channels: 0.5, 1.0, 3.0 and 5.0 m
2 channels: 0.5 and 5.0 m
4 channels: 0.1, 0.5, 1.0 and 5.0 m |
| Counting efficiency |
50% (per JIS) |
| System pressure |
0.2 … 0.8 MPa |
| Flow rate |
S 130: 2.83 l/min
S 131: 28.3 l/min |
| Sampling rate |
One sample per minute |
| Calibration |
NIST traceable |
| Measuring unit |
Particle counts per ft³, l or m³ , selectable Concentration in μg/m³ |
| Gas connection |
6 mm quick connect |
| Electrical connection |
M12 connector |
| Gas temperature |
0 … 40 ºC (at inlet) |
| Ambient conditions |
10 … 40 ºC |
| Transport temperature |
-30 … +70 °C |
| Output signal |
RS-485, Modbus/RTU
SDI (internal CS-iTEC signal)
4 … 20 mA
Alarm relay |
| Power supply |
24 VDC, 5 W |
| Application |
Downstream of filters wherever upstream drying and filtration is applied |
| Casing / dimensions |
PC, Al alloy, 271 X 205 X 91 mm |
| Classification |
IP65 |
| EMC |
According to IEC 61326-1 |
| Settings |
Various sensor settings can be performed through the related service software |
| Weight |
1900 g
|
|