Máy gia nhiệt vòng bi SKF TIH 220M/230V
    
        
            | SKF m20 performance | 
            220 kg (480 lbs) | 
        
        
            | Voltage, V/Hz | 
            200-230V/50-60Hz | 
        
        
            | Bearing | 
            Maximum weight  | 
            300 kg (661.4 lb)  | 
        
        
            |   | 
            Maximum bore diameter | 
            60 - 600 mm (2.3 - 23.6 in.) | 
        
        
            | Temperature control | 
            Range | 
            0 - 250 °C (32 - 482 °F) | 
        
        
            |   | 
            Magnetic probe | 
            Yes, K-type | 
        
        
            |   | 
            Accuracy (electronics) | 
            ± 2 °C (± 3.6 °F)  | 
        
        
            | Time control | 
            Range | 
            0 - 60 minutes | 
        
        
            |   | 
            Accuracy | 
            ± 0,01 sec. | 
        
        
            | Maximum heating temperature* | 
            250°C (482 °F)  | 
        
        
            | Thermometer mode | 
            Yes | 
        
        
            | Bearing mode (pre-set at 110 °C/230 °F)  | 
            Yes | 
        
        
            | Power reduction | 
            2-step; 50 - 100% | 
        
        
            | Demagnetisation according to SKF norms (automatic)  | 
            Yes (<2 A/cm) | 
        
        
            | Can heat sealed bearings | 
            Yes | 
        
        
            | Can heat pre - greased bearings  | 
            Yes | 
        
        
            | Error guiding codes | 
            Yes | 
        
        
            | Thermal overload protection | 
            Yes | 
        
        
            | Maximum magnetic flux | 
            1,55 T | 
        
        
            | Control panel | 
            Key board with LED in remote control | 
        
        
            | Operating area (w × h) | 
            250 × 255 mm (9.8 × 10 in.) | 
        
        
            | Coil diameter | 
            140 mm (5.5 in.) | 
        
        
            | Dimensions (w × d × h) | 
            750 × 290 × 440 mm | 
        
        
            | Total weight, including yokes | 
            86 kg (189 lbs) | 
        
        
            | Maximum power consumption | 
            10,0-11,5 kVA (400-460V)  | 
        
        
            | Number of standard yokes | 
            2 | 
        
        
            | Standard yokes | 
            70 × 70 × 430 mm (2.8 × 2.8 × 16.9 in.),  
            for heating bearings with bore diameter of 100 mm (3.9 in.) and larger  
             
            40 × 40 × 430 mm (1.5 × 1.5 × 16.9 in.),  
            for heating bearings with bore diameter of 60 mm (1.6 in.) and larger  | 
        
        
            | Core cross section | 
            70 × 70 mm (2.8 × 2.8 in.)  | 
        
        
            | Yoke storage | 
            Yes | 
        
        
            | Sliding arm  | 
            Yes, 70 x 70 x 430 mm  
            (2.8 x 2.8 x 16.9 in.) yoke only | 
        
        
            | Swivel arm | 
            No | 
        
        
            | Cooling fan | 
            No | 
        
        
            | Housing material | 
            Steel and glass fibre  
            filled polyamide | 
        
    
Công ty CP Công Nghệ Đỉnh Cao
 
Trụ sở: Số 12 Chân Cầm, Hàng Trống, Hoàn Kiếm, Hà nội
 
VPGD: Phòng E2, Tòa nhà C4, Đường Đỗ Nhuận, Xuân Đỉnh, Từ Liêm, Hà nội
 
Tel: +84 (4) 22428148; Cel: 0984843683,Fax: +84 (4) 37505143
 
VPGD: Tầng 19, Tòa nhà Indochina/ Số 4, Nguyễn Đình Chiểu, P.Đakao, Q.1, 
 
TP Hồ Chí Minh..
 
Tel: 08.6685 8911 Fax: 08.6284 0993.
 
Website: www.ttech.vn, www.store.ttech.vn, www.tshops.vn, www.stock.ttech.vn, http://www.omega-air.vn/