Compliance HT-2800PR Hipot Tester, 0-2800Vdc 5mA, Adjustable Ground Continuity

Mã sản phẩm:
Sử dụng cho Model:
Hãng SX:	Compliance
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Số lượng:

Đặt hàng

Liên Hệ Hỗ Trợ

- SĐT: 0984 843 683
- Mail: info@ttech.vn
- - Zalo: 0984.843.683

Thông tin sản phẩm

Feature:

High precision leakage current, duration and ground continuity settings
Allows no load setup of leakage current and test dwell times
Once entered, ground continuity setting, leakage current and test dwell times can be referenced on the front panel display when unit is not testing
Leakage currents can be set from 1-5 mA DC in 0.1mA increments
Dwell times can be set from 1-60 seconds in 1 second increments
Two tests with one setup. Conducts UL/CSA Ground continuity and Hipot tests with one setup, so no additional equipment is needed
Small and light. 9.25" wide x 4.75" high x 10" deep. 14 lbs. But rugged enough to test manufactured housing
Ground continuity check is defeatable for testing two-wire products
Easy equipment connections. Plug your equipment right into the NEMA plug on the front panel. No adapters needed!
J2 and J3 cords allow connection of pigtail power leads
Simple test outcome judgement. Green lights mean pass - red lights mean fail. Failing tests sound a buzzer as well
Ready for your UL Inspector out of the box. NIST Traceable Calibration Certificate to MIL-STD45662-A is included. Cal cert is in accordance with UL guidance
Operation Instructions are printed on the rear panel for easy reference
In-depth testing. Both true Arc Dectection and Leakage Current circuits test the product to find problems
RED lights and a buzzer leave no question if a failure has occurred
Expandable for TUV/European Agency Testing. Can be connected to our GF-30ac 25A Ground Bond Tester with optional TEST-LINK™
Easy shift-by-shift Function Test. Compatible with our Patented function checker, the HTT-1and HTT-1R (With 0.1 ohm Ground check Pass/Fail Setup)

General Specifications
Voltage Test Type	AC/DC
Voltage Range	0-2000 AC 0-2800 DC
Leakage Current Set Point	1-20 mA AC 1-5 mA DC
Input Voltage Requirements	117-127 V, 50 /60 Hz
Fuse Requirements	120 V, 2 A Slow Blow
Arc Detect	Independent High Frequency Circuit
Leakage Detect	Independent Low Frequency Circuit
Ground Continuity Set Point	0.08-1.5 Ω, Defeatable
Ground Continuity Test Current	100 mA
Test Time Range	1 - 60 Seconds
Ramp Time Range	1 - 5 Seconds
Voltage Meter Accuracy	± 2 %
HV Shutdown by Ground Fail	< 7 mS
Duty Cycle	100%
Discharge Time	< 7 mS VAC < 1.3 Sec VDC at open circuit
Transformer Power	< 500 VAC
Pass/Fail Repeatability	± 3 %
Output Connector	NEMA plug, Alligator Clip (HT-3000PR only)
Display	4 digits LED display
Test Indicator	Led indicators
Failure Indicator	Led indicators and buzzer
Programable	No
PLC Interface	Optional
TestLink (With GF-30AC)	Optional
Computer Control	No
Voltage Hold on failure	No
Top Mounted Handle	Optional
Test Defeat	Ground Continuity
Autoreset on Pass	Optional
Operation Temperature	15 - 40 °C
Relative Humidity Range	0 - 90 % Non-condensing
Dimensions	9-1/4" wide x 4-3/4" high x 10" deep
Weight	14 Lbs
Calibration	One year calibration Certificate
Test Cords	Return Lead, Power Cord Ground Continuity Connector Tip J2 and J3 Optional Alligator Clip (HT-3000PR Only)