| Designation |
TMHP 10E |
| Description |
Advanced hydraulic jaw puller kit |
| Contents |
1 x arm-assembly stand 3 x arms, 115 mm (4.5 in.) 3 x arms, 160 mm (6.3 in.) 3 x arms, 200 mm (7.8 in.) 1 x hydraulic spindle TMHS 100 3 x extension pieces for hydraulic spindle; 50, 100, 150 mm (2, 4, 6 in.) 1 x nosepiece with centre point for hydraulic spindle |
| Maximum stroke |
80 mm (3.1 in.) |
| Weight complete kit |
14,5 kg (32 lb) |
| Cycle life hydraulic cylinder |
Minimum 5000 cycles up to 100 kN (11.2 US ton force) |
| Threading hydraulic cylinder |
UN 1½'' x 16 tpi |
| Safety valve setting hydraulic cylinder |
105 kN (11.8 US ton force) |
| Carrying case dimensions |
578 x 410 x 70 mm (23 x 16 x 2.8 in.) |
| Nominal working force |
100 kN (11.2 US ton force) |
| Arm set 1 (3 x TMHP 10E-10) |
| Effective arms length |
115 mm (4.5 in.) |
| Width of grip |
75-170 mm (3.0-6.7 in.) |
| Claw height |
6 mm (0.25 in.) |
| Arm set 2 (3 x TMHP 10E-11) |
| Effective arms length |
160 mm (6.3 in.) |
| Width of grip |
80-250 mm (3.1-9.8 in.) |
| Claw height |
7 mm (0.28 in.) |
| Arm set 3 (3 x TMHP 10E-12) |
| Effective arms length |
200 mm (7.9 in.) |
| Width of grip |
110-280 mm (4.3-11 in.) |
| Claw height |
7 mm (0.28 in.) |