Bộ ghi dữ liệu nhiệt độ Scanntronik Thermofox Multisensor
The Thermofox Multisensor makes it possible to capture up to 11 temperatures concurrently. Eight up to 15 m long inexpensive NTC sensors can be attached directly at the socket connector of the sensor module, with two further NTC sensors being connected with the base unit. One sensor is inside the base unit. The keys of the data logger allow the selection of individual channels on site even without a PC and the reading of the measuring results. Parameters, such as the measuring rhythm, the date, the calendar or the hysteresis, can be set with the help of the PC software which is available separately. 
The software allows extensive analysis of the data on the screen, printing of the charts and of course much more besides. In addition to the classic temperature sensor system, it is also possible to use pairs of measuring clamps at up to 10 different places, like the Materialfox, to determine the ohmic resistance of any material (e.g. material moisture of wood or concrete). All you need is another sensor module to do this (see Materialfox Multisensor). All other functions correspond to the Thermofox basic device.