Ampe kìm FCM-100 Flexible AC/DC current tester
Hãng sản xuất : Multi
| Clamp sensor/Current detection part |
| Sensing method |
Split type CT with array of hole element sensors |
| Inside diameter of CT |
φ200mm (Approx.700mm length,270g) |
| Withstanding voltage |
AC 2200V/1 minute |
| Lead length |
Approx.2m (From measuring unit to CT) |
| Measuring part |
| Mesuring function |
AC/DC current |
| A/D Conversion |
Dual slope integration method |
| Measuring ranges |
AC/DC 3A/30A/300A/2500A (AC50/60Hz,DC) |
| Range selector |
4 range manual by rotary switch |
| Sampling rate |
2 times/sec |
| Display |
LCD max.3200 count with annunciators |
| Over range indication |
"OL" mark on LCD |
| Data hold indication |
"DH" mark on LCD |
| Low battery indication |
"B" mark on LCD |
| Data hold function |
Freeze the displayed value by D.H switch |
| Zero(offset) adjustment |
By zero(0) SET switch (DC current only) |
| Auto power off |
Approx. 10 minutes after power on |
| General specification |
| Limitation of circuit voltage |
Less than AC 600V |
| Operating temperature |
0～45℃, < 85%RH (without condensation) |
| Storage temperature |
-10～60℃, < 70%RH (without condensation) |
| Withstanding voltage |
AC 2200V/1 minute between flexible sensor and outer case |
| Power supply |
1.5V(AA size or UM-3) battery×6 |
| Dimension |
Main unit:159(W)×105(H)×53(D)mm |
| Accessories |
Carrying case, Batteries, Instruction manual |
|